Design

• Convoyer dishwasher without drain pump
• Stand-alone unit
• Electric rinse aid supply
• with cleaner pump
• 2 Wash arms for effective cleaning
• 2 Rinsing arms
• Door opening with safety system
• electromechanical control system with no servicing required
• Suitable for dishes and pots
• Easy to clean

Quality

• Corpus made of high quality stainless steel AISI 304
• Very robust device

Rinsing process

• easy handling: 4 programms
• 
  
• rinsing programm I:
• washing cycle: 60 seconds
• Baskets/h: 60 pieces
• 
  
• rinsing programm II:
• washing cycle: 120 seconds
• Baskets/h: 30 pieces
• 
  
• rinsing programm III:
• washing cycle: 180 seconds
• Baskets/h: 20 pieces
• 
  
• rinsing programm IV:
• washing cycle: 480 seconds
• Baskets/h: 8 pieces

Technology

• Cleaner tank with double filter system
• rotating, non-congestive wash and rinse arms
• electric rinse aid dosage pump (white  hose)

Product benefits

• high washing performance
• Washing cycle starts automatically after closing the cover
• Special rinsing system and insulated boiler keep the set temperature and rinsing water pressure constant
• Built-in standby system to save energy
• Excellent cleaning results
• Simple operation

Connection:

• Output: 7,1 kW
• Electric connection: 230 Volt / 1 N~ / 50 Hz

Dimensions

• External dimensions W x D x H: 655 x 785 x 1500/1950 mm

scope of supply

• Universal basket
• 2 Plate baskets (18 p.)
• 1 transparent hose for rinse aid with float
• 1 Water drainage hose
• 1 Water inlet hose

Guidelines

• Produced according hygiene and safety requirements
• EU, CE and the product has been produced in accordance

Note

• Information on supply voltage in the user manual
• Please note that the device can be operated with a hot water connection as well as with a cold water connection. The values of the flushing programs can only be guaranteed with a hot water connection.
• Only suitable for chlorine free cleaners.
• For optimum rinsing, we recommend that you regularly descale the appliance and its components!
• If you have installed a de-scaler upstream of the cartridge, please note that the cartridge must be regenerated after approx. 1.500 - 2.000 litres of water flow. The actual maximum flow rate is determined by the water hardness.
• Detailed instructions can be found under the tab 'Download' and 'Video'.